كيفية إيقاف إصدار كاشف الدخان بدون بطارية

How to stop smoke detector from chirping without battery is not a difficult thing but it does plagued many people. Today we are going to look into it from basic definition to depth.

Battery-Powered Smoke Detectors

Battery-operated smoke detectors do not rely on an external power source, so users can choose the appropriate installation location according to their needs. Since it can continue to work in the event of a power outage in the community, it provides continuous protection for the family. Typically, its battery compartment is usually located on the back or side of the detector. The battery model and polarity are marked on the battery compartment cover so that customers can install the battery correctly.

Why Smoke Alarm Beeps Without A Battery

When its battery is depleted, the alarm may beep to alert the user that it time for replacing the battery. This is a precautionary measure to ensure that the alarm works properly in the event of a fire. Or, if the battery is poorly connected to the alarm, the alarm will also beep. A poor connection may be due to improper battery installation, dust in the battery compartment, or inverted battery polarity.

How Long Will A Smoke Detector Beep Without A Battery?

Kidde i9040

When the battery is low, the smoke alarm will emit a short alarm sound every 30 ل 40 seconds for at least 7 days.

First Alert SCO501CN

When the battery is low, the smoke alarm will emit a beep lasting about 10 seconds and may be repeated at intervals, such as a few minutes, until the battery is replaced

Nest Protect

The Nest Protect smoke alarm emits a continuous beep through its built-in speaker when the battery is low. Each beep lasts about 15 seconds until the battery is replaced or the charger is connected.

BRK Electronics 7010B

When the battery is low, the smoke alarm will emit a beep for about 20 seconds at intervals of 30 seconds to 1 minute to remind the user to replace the battery.

X-Sense SC02

The X-Sense SC02 smoke alarm will beep for a short period of about 15 seconds before the battery runs out. And it may repeat every 1 minute until the battery is replaced.

SecureSense SS-825

When the battery of the SecureSense SS-825 smoke alarm is low, it will emit a beep lasting about 25 seconds and may be repeated every 2 minutes to indicate that the user should replace the battery.

The duration of the low battery sound will vary depending on the model and manufacturer of the smoke alarm. To ensure accuracy, it is recommended to refer to the smoke alarm’s instruction manual.

كيفية إيقاف إصدار كاشف الدخان بدون بطارية

Replace the بattery

The most direct and effective way is to replace the battery in the smoke alarm. Of course, we want to make sure that we use high-quality alkaline batteries, because alkaline batteries usually last longer.

Check and Correct the صower Connection

If the battery pole does not touch the protruding metal at both ends of the battery compartment, then we should move the battery slightly or press the battery into place. If there is dust in the battery compartment, we can clean the dust first and then install the battery back. Finally, we should check if the battery polarity is well installed.

How to Change the Batteries in Your Smoke Alarm

First of all, we prepare the smoke alarm to use batteries, like 9 volt batteries or AA, AAA or button batteries.

The battery compartment cover may then be a screw-mounted, snap-on, or sliding design. We need a small screwdriver to open a screwed battery compartment, while a snap-on battery compartment can be opened by pressing or flipping the snap-on. Alternatively, we can just slide the battery compartment by your hands.

Next, if there are old batteries in the detector, please remove them carefully. Don’t forget to avoid leakage of battery fluid or damage to the electronic components inside the detector.

The next step is to put the new battery into the battery compartment in accordance with the correct polarity. عادة, there is clear positive and negative electrode installation prompts for users on the surface of the battery compartment.

In the final step, we put the battery compartment cover back on and make sure it is securely secured.

Check the Battery’s Fit

• We should place the battery correctlyin the device without misalignment or tilt.
• The electrode of the battery is in full contact with the gold finger of the device interface.
• After installing the battery, the smoke detector normally operates with no heat in the battery compartment.

Look at the Battery Door

• The battery compartment door has been tightly closed with no gaps or loosens.
• Screws and clasps of the battery compartment door are properly installed and secured.

Resetting a Smoke Alarm

Press and hold the self-check/mute button on the smoke alarm for about 1 second. If its indicator flashes red and yellow once and the buzzer beeps once, then it works properly.

If the alarm supports intelligent connection, the user can test whether the alarm can work properly through the mobile APP. First, users download the appropriate APP in the app store. Then we added and connected the smoke alarm on the device page of the app. After these preparations, we can press the test button to see whether the alarm makes a normal sound. فضلاً عن ذلك, smoke alarm with advanced functions can also achieve automatic inspection and self-check fault alarm.

How Often Should You Change Your Batteries?

Different brands have different battery replacement frequencies.

HIKVISION NP-Y3-WF

Alarm: Sound, volume greater than or equal to 85dB within 3 meters

Functions: واي فاي إنترنت الأشياء, dual optical path, photoelectric

Batter Type: AA (LR6), 2 knots 1.5 volts

Battery replacement: every 2 سنين (based on 1 alarm per month for 5 minutes)

MIUI-Honeywell

Alarm: Light & sound, volume greater than or equal to 80dB within 3 meters

سمات: إنترنت الأشياء بتقنية البلوتوث

Batter Type: Lithium battery (CR17450) 1 piece, 3V

Battery replacement frequency: every 5 سنين (calculated by 1 alarm every 10 days, 3 minutes each time + 600 flashing lights)

Dahua DH-HY-SA4FA

Alarm: Dual light path, photoelectric type

سمات: WiFi, sound + light, volume greater than or equal to 87dB within 3 meters

Batter Type: Lithium battery (CR123A) 1 piece, 3V

Battery replacement frequency: every 3 سنين

DFA 109 819d WiFi

Alarm: Audible and visual alarm, volume greater than or equal to 80dB within 3 meters

Function: واي فاي إنترنت الأشياء

Battery Type: Two 1.5 volt batteries

Battery replacement frequency: every 2 سنين

Phixson ODM Smoke Detector

Alarm: Sound/Grouping-device Sound/Visual Display/LED Light/Smartphone Notification

Network: Wifi IoT /Bluetooth /+

Power source: Battery/Corded Electric/Hardwired

Battery replacement frequency: every 2/3/5 سنين

How to Make Smoke Detector Stop Beeping After Replacing Battery

Even if the battery has been replaced, it may take a while for the detector to recognize the new battery and stop buzzing. We can be patient for a moment.

بجانب, there is a button to reset or turn off manually on most smoke detectors. عادة, it is located on the side or bottom of the detector. We can try to stop beeping by pressing or rotating these buttons first. If the detector has a switch, you can directly restart it.

If the detector has self-test function, it may test automatically after replacing the battery. Please wait for the test until it finishes. If everything is OK, the beeping should stop.

If the above methods do not work and there is no fire hazard, we may need to seek guidance from the manufacturer of the Smoke detector.

التعليمات

How to Stop Hardwired Smoke Detector with No Battery Chirping

First, check whether the home power supply is normal. Hard-wired smoke detectors are directly connected to the home power system, so power instability may cause the detector to emit abnormal sounds.

Some hard-wired smoke detectors come with a microprocessor, so it may not clear the error status immediately after replacing the battery. At this point, we can try to hold down the detector’s “Test” button until the chirp stops.

If the above methods do not work, you may need to manually clear the error. There is a circuit breaker in the distribution box that controls the smoke detector circuit. We find it and turn it off. Then, remove the smoke detector from the ceiling and unplug it. Next, we hold down the “Test” button until the detector sounds and stops. Finally, reinstall the detector and turn on the power. Or, there may be dust inside the smoke detector. At this point, we can remove the battery and thoroughly clean the probe’s battery compartment and air intake.

If we still can’t stop its chirping after doing the above, it may be due to a fault inside the detector. At this point, we recommend contacting professional maintenance personnel for repairs.

How Long Will A Smoke Detector Chirp Before It Dies?

It usually emits a beep every minute, and each beep lasts for a few seconds or between 30 و 60 ثواني. This will last for about 30 days until the battery is completely depleted.

How to Stop Smoke Alarm From Beeping Every 30 ثواني

When the smoke alarm beeps every 30 ثواني, there are four possible reasons as follows.

How to Turn off Smoke Alarm Permanently

Permanently turning off smoke alarms is not a recommended practice. Because smoke alarms are important safety devices in homes and businesses, they can provide timely alarms in the event of a fire. If you do need to turn off the smoke alarm temporarily or permanently, you should either turn it off or cut off its power directly.

If your smoke alarm supports app controls, try setting the mute function without disabling the device. بهذه الطريقة, users can view the app’s alarm history at their leisure without sound disruption of the alarm.

Takeaway

If you want more information about How to Stop Smoke Detector From Chirping Without Battery, please feel free to contact us.